Name: 3M 6H Speed Stripper - 2L/Bottle
SKU: C802
Availability: InStock

3M 6H Speed Stripper – 2L/Bottle

$51.18

Formulated to quickly and effectively soften and remove floor finishes and sealers from resilient floors.

8 in stock

Use with 3M Twist ‘n Fill chemical management system
Superior performance in removing multiple layers of finishes hardens from frequent burnishing
Five minute dwell time
Low foaming
Non damaging to vinyl
Non-ammoniated formula
No rinsing or neutralizing needed
Mild, soapy fragrance
High flow for use in filling buckets
2 liter concentrate bottle yields 8.2ready-to-use gallons

Dilute 3M 6H Speed Stripper Concentrate using the Twist ‘n Fill dispenser into a bucket.

Sweep or dust mop the floor.
Liberally apply the diluted stripper solution with a mop, leaving the floor uniformly wet.
Allow 5-10 minutes for the stripper to penetrate and soften the finish.
Observe the floor and apply additional solution to areas that may be drying out.
Use a 175 RPM floor machine with the appropriate stripping pad to thoroughly remove the old finish from the floor.
Pick up the soiled solution with a wet vacuum.
Flood rinse the floor with clean water and remove with a wet vacuum.
Check the floor when dried for residue by wiping it with a dry hand.
- If residue is observed, floor rinse the floor again.
Inspect floor for any remaining finish and repeat process as necessary to remove fully.
Mop the floor with a tightly wrung mop of clean water.
Let the floor dry completely before applying new finish.