- Durable finish stays clean and clear
- Dries to a high gloss without polishing
- Excellent base for spray buffing to a brilliant, mirror-like finish
- Resistant to spills and water tracked on floors during bad weather
- Can be mopped or scrubbed with a mild detergent without removing the finish or harming the gloss
- Easily removed with stripper when desired
- May be used on vinyl, VAT, VCT, linoleum, marble, terrazzo, concrete, brick, flagstone, epoxy, and other resilient and non resilient floors
Truekleen X-Cel Plus Ultra High Wear/Gloss Floor Finish – 2.5 Gallon Bib – 2/Case
$110.00
The right product for beautiful, safe floors requiring minimum maintenance. This modern blend of clear acrylic polymers is easy to apply and dries to a high gloss without polishing. Resists black marks and scuffing, resists tracked in water and is not harmed by surface cleaning with detergents, but can be removed easily when desired.
Description
FEATURES
GENERAL USE DIRECTIONS
- Old brand of finish should be removed with a floor stripper.
- Rinse thoroughly and allow floor to dry.
- Apply a thin uniform coat in a figure-eight motion using a clean finish mop.
- Avoid contact with finish as it dries.
- Allow 20-30 minutes between before applying a next coat or walking on the floor.
- Dust and damp mopping will keep floors bright and shiny.
- If floor becomes dull from heavy traffic, this finish is an excellent base for spray buffing.
Reviews (0)
Related products
Betco Express® 15 Minutes to Recoat Floor Finish – 5 Gallon Bib (ASAP Replacement)
Express is a fast drying, fast curing, and extremely low odor floor finish with superior black heel mark resistance. It utilizes a highly durable, internally cross-linked polymer specially blended to minimize dry and cure times. This labor saving, one of a kind floor finish can be re-coated in as little as 10-15 minutes allowing up to six coats in an hour.
Reviews
There are no reviews yet.