- Use with 3M Twist ‘n Fill chemical management system
- Uses effervescing action to clean carpet and non-porous surfaces
- Low odor
- No rinsing is required
- Designed to be used with cold water
- Green Seal GS-37 Certification
- High flow for use in filling buckets
- 2 liter concentrate bottle yields 53 ready-to-use gallons
3M 34H Peroxide Cleaner – 2L/Bottle
$36.10
An all purpose, light duty, peroxide cleaner concentrate that is a versatile, daily use cleaner effective against stains and soils.
Description
FEATURES
GENERAL USE DIRECTIONS
Dilute 3M 34H Peroxide Cleaner Concentrate using the Twist ‘n Fill dispenser into a properly labeled sprayer, bucket, autoscrubber, or extractor.
- Dispense with cold water using the Twist N Fill dispenser into a properly labeled container.
- Apply the solution using a mop and bucket.
- Scrub as required using a hand pad or sponge and wipe the surface dry.
- When used on carpet or upholstery, blot to remove spot or stain and rinse with water.
- Floors may be slippery when wet.
- Dispense with cold water using the Twist N Fill dispenser into a properly labeled container.
- Apply the solution using a mop and bucket or autoscrubber.
- Thoroughly wet floor with solution.
- Let solution stand for several minutes to penetrate soil and soap scum.
- Agitate using a brush or floor pad.
- Pick up soiled solution using a mop or wet vacuum.
- Rinse with clean water.
- Dispense with cold water using the Twist N Fill dispenser into a properly labeled container.
- Vacuum the carpet area thoroughly.
- Place the extraction cleaner solution directly into the solution tank of your carpet extractor or tank of your sprayer.
- Extract the carpet using overlapping passes of the extraction wand.
- Move the extractor slowly over the carpet, making two passes.
- 1st pass: dispense the peroxide cleaner throughout
- 2nd pass: vacuum only – do not reapply solution
- Dispense with cold water using the Twist N Fill dispenser into a properly labeled container.
- Vacuum the carpet area thoroughly.
- Fill the extractor with cold water only.
- Apply the peroxide cleaner to the carpet area using a sprayer at a rate of ~50 ft per diluted gallon.
- Allow 1-3 minutes of dwell time.
- Provide agitation to heavily soiled areas using a brush or carpet bonnet (optional).
- Extract the carpet using overlapping passes of the extraction wand.
- Move the extractor slowly over the carpet, making two passes.
- 1st pass: dispense rinse water throughout
- 2nd pass: vacuum only – do not apply additional water
Reviews (0)
Related products
Clausen Non-Browning Carpet Neutralizer – 4 Gallons/Case
Non-Browning automatically neutralizes the residual alkaline pH from extraction carpet cleaners, rug shampoos, and bonnet carpet cleaners, thus reversing or preventing gradual browning of the fibers. At the same time, it acts as a final rinse to remove the last of any soil or detergent to complete the cleaning job.
Truekleen Perfect-O2 Oxygenated Multi-Purpose Cleaner – 32oz Bottle – 6 Bottles/Case
A multi-purpose cleaner with oxygenated peroxide and fortified with high performance solvents and surfactants. This unique blend of oxygen boosted surfactants and cleaners means it will safely clean and degrease the toughest soils. Perfect-O2 contains more than double the level of peroxide than other products.
Reviews
There are no reviews yet.