3M C. diff Solution Tablets

• Prepare solution strength as required, refer to efficacy data for correct doses and contact times and for solution preparation.
• Apply use solution to pre-cleaned, hard, nonporous, inanimate surfaces with brush, spray device, sponge, cloth or mop to wet all surfaces thoroughly.
• Allow to remain wet for contact time as indicated in the efficacy data, then remove product by wiping with brush, sponge or cloth.
• For sprayer applications using a spray device, spray at appropriate distance from surfaces, depending on sprayer type (6-8 inches for spray bottles). Allow to remain wet for contact time as indicated in the efficacy data, then remove product by rubbing with brush, sponge, wipe or cloth, or allow to air dry. Do not breathe spray mist.
• Before using this product, food products and packaging materials must be removed from the room or carefully protected.

Cleaning Procedure:

• Fecal matter/waste must be thoroughly cleaned from surfaces/objects before disinfection by application with a clean cloth, mop and/or sponge saturated with the disinfectant product. Cleaning is to include vigorous wiping and/or scrubbing, until all visible soil is removed. Special attention is needed for high-touch surfaces. Surfaces in patient rooms are to be cleaned in an appropriate manner, such as from right to left or left to right, on horizontal surfaces, and top to bottom, on vertical surfaces, to minimize spreading of the spores. Restrooms are to be cleaned last. Do not reuse soiled cloths.

Directions for Use:

• Prepare a 4306 ppm solution (add 4 tablets to 1 gallon or 1 quart of water).
• Apply to pre-cleaned surface with mop, cloth, sponge, brush, wipe, or mechanical sprayer.
• Allow surface to remain wet for 4 minutes (only when using a 4306 ppm solution), re-applying as necessary.
• Allow to air dry.

This product when used as directed below is effective against Mycobacterium bovis (TB). This product can be used on hard non-porous surfaces in commercial institutional hospital and other premises (including kitchens, bathrooms, sick rooms, laundry rooms, eating establishments, pet kennels, and veterinary premises).

• To disinfect hard non-porous surfaces first clean surface by removing gross filth (loose dirt debris, food material, etc).
• Prepare a 5,382 ppm available chlorine solution (add 5 tablets to 1 gallon or 1 quart of water).
• Thoroughly wet surface with the solution and allow it to remain in contact with the surface for 4 minutes, reapplying as necessary.
• Allow to air dry.

This product is a healthcare disinfectant when used at a level of 4,306 ppm available chlorine disinfectant solution. It is effective against Norovirus, Coxsackievirus, and Aspergillus fumigatus with a 1-minute contact time. It is effective against Salmonella enterica, Staphylococcus aureus, Pseudomonas aeruginosa, carbapenem-resistant Klebsiella pneumoniae, Acinetobacter baumannii, vancomycin-resistant Enterococcus faecalis, Staphylococcus aureus-methicillin-resistant (MRSA) and glycopeptide-resistant (GRSA), Streptococcus pneumoniae and Candida albicans with a 4 minute contact time.

• Prepare 4,306 ppm solution (add 4 tablets to 1 gallon or 1 quart of water).
• Apply to surface with mop, cloth, sponge, brush, wipe, or mechanical sprayer.
• Allow surface to remain wet for the appropriate contact time. Refer to efficacy data.